This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title

Monthly Archives: March 2017

Be Enjoy with Smooth Ride

Frequently, car owners will spend their weekends cleaning away the grime and dust that has gathered on their car.Cleanliness and timely alloy wheel repair are essential factors for enjoying a smooth drive in your elegant car.

However, many car owners will neglect the wheels of their car. The wheels of a car can quickly succumb to brakedust, road salt, sticky tar and other issues. Many of them will only sparkle for a short time, when they are new. It can also be the most challenging part of the car to clean.

Manufacturers and owners are quickly shiftingfrom sturdy and heavy steel base over to elegant looking alloy wheels.These are come in a myriad of different colors. You can also polish it to enhance their overall appearance of the vehicle. However, this appearance can be short-lived if you are not careful; the moment the wheels roar into action, grime, brake dust, and dirt can soon take root again.

The wheels must also be regularly washed and cleaned. This is the best way to return them to their original splendor.

  • When wheels are continually exposedto elements like dirt and road salt, they lose their original sparkle. Therefore, it is advisable to protect the wheels when they are being installed. Some wheels are polished, while others are painted or coated. For polished wheels, it is best for car owners to use polish as a protective layer; wax can be used for others.
  • The protective finish also needs protection. Regular cleaning with a mild soap and water is essential to keep the finish looking sparkly and new. You will needwater and a hose, large cotton swabs, and a wheel washing brush. Cotton swabs will enable you to reach the hard to reach spots on the wheels.Tar can be efficiently removed with tar remover or bug remover. It is important to avoid hard material when you are washing, as it may ruin the polish and coating.This process for the protective finish must be frequently repeated.
  • A warm, sunny day is the best time to clean the wheels of your car. You can use a hose to drive the dirt away, so you can reduce the need for excessive scrubbing; excessive scrubbing may damage the polish. Then, you can clean the wheels with a wheel cleaner. A wheel brush can be used to clean the spokes. Once you dry the wheels, they will look as good as new.

Cleaning is definitely a requirement if you wish to havewell-maintained wheels. Additionally, alloy wheel repair is equally important for your car.

Pack Wheel Spacers

Select the right spacers

One you go to the seller, tell him about you vehicle make and the model for the spacer that you are interested in. You can also ask for a catalogue of the best wheel spacers that are being sold by the dealer. The similar details should be available on the website of the dealer too. Once you are satisfied with the technical specifications, you can place your order. There should be options of online order too, as per the modern day needs of business. Support contact must also be provided on the site in case any problem is faced.

Should be fitted by an expert

The wheel spacers once are delivered to you must be fitted onto your vehicle by expert mechanics. Proper guidelines for fitting must be furnished alongside with the products during dispatch. These need to be abided by for the correct functioning of the best wheel spacers for your vehicle. The fittings must not be done by a novice person as he may not be able to do it properly. This can increase the chances of accidents too. Once properly fitted, these can be really marvelous in terms of the result produced.

Clean the lugs first before attachment

The fitting of the spacers must be carried out firmly and securely. There should be no gaps between the spacers and the wheel or the hub. This can be avoided by the proper use of packs and bearings. The spacers must be totally clean. If replacement is being done, it has to be seen that there are no rusts or dirt on the lugs where these items would be attached. Proper usage of rugs and wired brushes should be made so that the parts are totally free from grease and dirt.

Auto Magnets

Placing the Signs:

Car magnets need a metal surface that is smooth and flat, usually the side or rear door panels. Try to center the magnetic car sign horizontally on the panel and carefully place one corner against the metal surface first. Allow the magnetic sign to pull itself and attach securely to the metal. For the best grip, the car magnet should be flat against the metal without air pockets. If you decide you need to reposition the sign, carefully remove it by pulling at the corner and reattaching it in the desired place. Dragging the magnet across the surface can scratch or damage your paint. Be sure to place the signs in smooth places that do not have ridges, dents or rust spots so that the magnetic signs lay flat. Also avoid areas of direct sunlight, like the hood of the car or other horizontal surfaces, as it can cause fading.

Removing Signs For Cleaning:

Cleaning your car magnets on a regular basis will keep them looking attractive and new. To remove the signs, do not bend or crease the corners, but carefully peel at the edge and release the magnet. Use a wet paper towel to clean the surface or Windex to help with dirt spots and stains. After cleaning the signs, make sure to dry it completely before placing it back on the vehicle.

Storing Magnetic Signs:

If car magnets are used to promote a seasonal sale or event, you will need to store the signs properly for future use. Storing magnetic car signs in a clean, dry place is best. Lay the magnetic signs flat on a sturdy shelf, and avoid stacking signs vertically with the magnetic sides touching each other. To keep signs from bending or creasing, do not stack heavy objects like boxes on top of the signs. Magnetic signs are durable and sturdy, but following these simple steps for care and maintenance will make sure the signs continue promoting your business even longer.

Maintain Car Engine

1, use the appropriate lubricants. Gasoline motor should use SD-SF gasoline engine oil into the exhaust system in accordance with attachments and conditions of use; diesel motor will have to use CB-CD diesel motor oil level according to the mechanical load, a standard not lower than the manufacturer requirements prevail

2, maintenance three filters: Three filters are the air filter, oil filter and fuel filter. Three filters in the car engine for air, oil and gasoline play a filtering effect, which plays a protective effect on the engine, but also improves the efficiency of the engine.

3, change the oil and filter regularly. Occurrence of any quality grade of oil in the course of CNPC quality will change, in order to avoid the occurrence of failure, should be combined with a regular oil change conditions of use, and to moderate oil (generally dipstick cap as well).

4, regularly clean the crank case. During operation of the engine, the high pressure combustion chamber unburned gas, acid, water, sulfur and nitrogen oxides through the gap between the piston ring and cylinder wall into the crankcase, and mixed with the metal powder produced by wear of the parts is formed sludge. Therefore, the crankcase should be cleaned regularly to keep the engine cleans inside.

5, the tank engine rust, scale is the most common problem. Rust and scale limit of the coolant flowing in the cooling system, reduces the cooling effect, resulting in engine overheating, and even cause engine damage. Therefore, the tank should be cleaned regularly to remove rust and scale them.

6, regular cleaning of fuel systems, controls coke formation, enabling the engine to maintain the best condition.

7, to keep the crank case ventilation. Now most of the gasoline engine are equipped with PCV valve (positive crankcase ventilation), but channeling gas pollutants are deposited around the PCV valve, the valve may be clogged. Therefore, subject to periodic removal of pollutants around the PCV valve.